Top 12 Timber Decking Mistakes to Avoid At All Costs

We understand everybody needs a beautiful lounging area around their home and a deck is probably the best answer to it. In Australia, homes are mostly architected with well-defined outdoors and a deck is certainly the most important feature to provide the required results; but what if a deck installation project goes wrong? There are ample citations where you may go wrong with installing a timber deck. Here take a look:

Rusted nails and bolts

Fasteners such as nails and bolts should be galvanised. Being coated with zinc these fasteners appear dull grey. Never get non-galvanised fasteners for the prized lounging arena.

Forgetting to check with the Council

Before visiting the timber decking company in Brisbane consider if you have got the project approved by the local council.

Crooked deck boards

To your horror, if you discover one morning that the deck installer has worked with crooked wooden boards, there will simply be nothing left for you to do. That’s why hire professionals who will ensure the boards are absolutely straight. Professionals know how to lay the boards. Every fifth board is the grid board installed right over the chalk line. Knowledge about the boards is necessary to avoid building a crooked deck.

Leakage in roof

Another vital aspect to consider as you get the deck installation done is getting the roof checked for leakage which often occurs due to over-tightened screws as a result of which the rubber washer gets damaged leading to leakage.

Sagging ceilings

A sagging ceiling is the outcome of ceiling supports fixed too far from each other. At first, the ceiling will appear absolutely great and only with time it will start to sag and make things difficult with moisture absorption and loads of other undesirable results.

Hitting the utilities underground

When installing the deck, make sure the architect has the floor plan with him. The floor plan will explain the utility lines running across the premise which should be avoided at all costs during a deck installation project.

Cracking or breaking timber

Scenarios such as these stem from pieces of timber that are too long in size. At least two-thirds of the board should sit on the bearer.

Sagging deck

A sagging deck is probably the last thing you want to see after you have invested a significant amount of money in the project. A sagging deck results when you have paid for inferior quality wood.

Black stains after the job

It surely turns out to be an eyesore for deck owners. Grinding sparks mostly lead to such unimpressive stains which should be cleaned immediately.

Rotting timber

If you find the posts of an existing deck in a rotten condition get it replaced straight away or you can apply post stirrups which keep off excess moisture.

Sinking deck

When the footings aren’t correct the deck is going to sink sometime soon. Get it solved now.

Greying deck boards

It happens due to short of maintenance. Always get a protective coating on the deck.

If you want to know the costs of installing a deck, always use the decking calculator to understand the expenses.

You must keep these major decking mistakes in mind to ensure your money doesn’t go in vain and that you are able to enjoy its benefits for an extended span.